aluminum coating造句

• Aluminum coating has good corrosion resistance
  铝镀层具备良好的抗腐蚀性能。
• Technology and quality inspection for hot - dipped aluminum coatings on iron or steel
  钢铁热浸铝工艺及质量检验
• Vacuum - metallized aluminum coatings
  真空喷铝箔
• High temperature oxidation resistance of arc spraying aluminum coatings on steel
  电弧喷涂铝涂层的抗高温空气氧化性能
• Metallic coating - hot dipped aluminum coatings on ferrous articles - specification
  金属覆盖层钢铁制品热浸镀铝技术条件
• Anti - oxidation performance of electro - pulse deposited aluminum coating on cr2mo boiler steel
  锅炉钢电脉冲沉积铝涂层的氧化行为
• Preparation and properties of aluminum coating electrodeposited from alcl3 lialh4 organic solvent
  4有机溶剂中铝镀层的制备与性能研究
• Protection against corrosion of iron and steel in structures - zinc and aluminum coatings - guidelines
  钢铁结构耐腐蚀防护锌和铝覆盖层指南
• High temperature oxidation resistance of arc spraying aluminum coatings with seal coat and its grey forecast
  封孔铝涂层的抗高温氧化性能及其灰色预测
• This work focuses on the design and fabrication of the aluminum coating leaky type of hollow fiber
  本文着重设计制备al涂层泄漏型空芯光纤，并对其制备工艺进行了深入的研究。
• The reflectivity of aluminum coating from aids and lja1h4 organic solution system can be higher than 80 % at ultraviolet area
  Alcl _ 3 + lialh _ 4有机溶液体系镀制的铝膜在紫外区的反射率可达80以上。
• Aluminum coating of electro - deposition has high purity , little pore and thickness and quality can be easily controlled versus other process
  相对于其它铝涂层工艺而言，电沉积的铝镀层纯度高、孔隙少，厚度和质量容易控制。
• This work studied the preparation process of aluminum coating and the factor of the properties of the aluminum coating such as processing condition , pre - treatment , electroplating system , current density , and current efficiency and electroplating time etc . . it is shown that alcl3 + lialh4 organic solution system can be fabricated aluminum coating and processing parameter of having high reflectivity aluminum coating is obtained
  对铝膜的制备工艺及影响铝膜性能的因素如工艺条件、预处理过程、电镀液体系、电流密度、电流效率及电镀时间等进行了研究，确定了通过alcl _ 3 + lialh _ 4有机溶液体系可用来镀制铝膜及获得高反射率膜的工艺参数。
• All kinds of testing result and analysis indicated that keep the same aluminum concentration ; the range of current density getting good aluminum coating can be accreted with the increased of aluminum chloride concentration . when the molar ratio of alcb and lialrj is 5 , the current density can be 10a / dm2
  各种测试结果和分析表明，在总的铝浓度不变的情况下，获得良好镀层所使用的电流密度范围可随氯化铝浓度的增加而增大，当alcl _ 3与lialh _ 4的摩尔比为5时，可使用的电流密度达到10a dm ~ 2 。
• Current density and electroplating velocity has line relation , but the increscent multiple of electroplating velocity is smaller than that of current density . which indicate that current efficiency decreases with the increase of current density at alcb + lialh4 system . at l - 5a / dm aluminum coating is dense and uniform , especially at 2 . 5a / dm
  电流密度与电镀速度两者近似成直线关系，但电镀速度增大的倍数比电流密度增大的倍数要小，说明在alcl _ 3 + lialh _ 4体系中随着电流密度的提高，电流效率逐渐降低。